MENU
- Home
- Products
- Heat Shrink Tubing
- Adhesive-Lined Heat Shrink Tubing
- AOS - Flexible Medium Wall Heat Shrink Tubing
AOS - Flexible Medium Wall Heat Shrink Tubing
Applications
AOS is made of elastomeric polyolefin. The inside is coated with a thick layer of hot melt adhesive which can provide a watertight seal for outdoor cable splices. The 4:1 shrink ratio and translucent tubing are particularly suitable for the connection protection of copper tube terminals.
Operating Temperature Range
- Continuous operating temperature: -55℃ ~ 110℃
- Minimum shrink temperature: 80℃
- Full recovery temperature: Above 120˚C
Color
Standard color: clear, (Special sizes and cut pieces are available on request.)
Characteristics
- Shrink ratio: 4:1
- Excellent waterproof performance
- Very flexible, UV resistant
- Compliance with RoHS and REACH environmental regulations
Technical Data
| Property | Specification Requirement | Test Method | Typical Value |
|---|---|---|---|
| Tensile strength | ≥10.3MPa | ASTM D2671 | ≥21MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥550% |
| Tensile strength after aging | 70% of initial value | ASTM D2671 (158˚C/168 hrs) |
≥70% |
| Elongation at break after aging | ≥100% | ASTM D2671 (158˚C/168 hrs) |
≥524% |
| Dielectric voltage withstand | AC2500V/60S No breakdown |
ASTM D2671 | No breakdown |
| Volume resistivity | ≥1013Ω‧cm | ASTM D2671 | ≥1013Ω‧cm |
| Copper corrosion | No corrosion | ASTM D2671 (158˚C/168 hrs) |
No corrosion |
Specification
| Part Number | Assupplied (mm) |
Afterrecovered (mm) |
StandardLength (Meter) |
|
|---|---|---|---|---|
| I.D. (min) |
I.D. (max) |
W.T. ( min) |
||
| AOS06 | 6.0 | 1.5 | 1.5 | 1.22 |
| AOS08 | 8.0 | 2.0 | 1.5 | 1.22 |
| AOS12 | 12.0 | 3.0 | 2.3 | 1.22 |
Related Products
