MENU

FEP - 200˚C FEP Heat Shrinkable Tubing

-65~+200 MinShrink60 Shrink1 25:1 Fireproof Uvproof RoHS

Applications

The FEP heat shrinkable tubing made of fluorinated ethylene propylene has excellent abrasion, chemical and high temperature resistance. Low coefficient of friction and non-stick characteristics of the material make it very suitable for the covering of drive rollers. FEP's material strength and UV resistance are often applied to the covering of fluorescent tubes and UV tubes.

Operating Temperature Range

  • Continuous operating temperature: -65℃ ~ 200℃
  • Minimum shrink temperature: 60℃
  • Full recovery temperature: Above 120˚C
  • Temperatures for product preservation: Below 50˚C

Color

Standard color: clear, (Special sizes and cut pieces are available on request.)

Characteristics

  • Shrink ratio: 1.25:1
  • Excellent flame retardance
  • Superior chemical and abrasion resistance
  • Ideal insulation property
  • High transparency
  • Coefficient of friction: 0.2~0.3

Technical Data

Property Specification Requirement Test Method Typical Value
Longitudinal change -5%~5% ASTM D2671 Pass
Tensile strength ≥13.8MPa ASTM D2671 ≥20MPa
Elongation at break ≥150% ASTM D2671 ≥250%
Dielectric voltage withstand AC2500V/60S
No breakdown
ASTM D2671 No breakdown
Volume resistivity ≥1015Ω‧cm ASTM D2671 ≥1016Ω‧cm
Copper corrosion  No corrosion ASTM D2671
(158˚C/168 hrs)
 No corrosion
Flammability VW-1 UL 224 Pass

Specification

Part Number As supplied
(mm)
After recovered
(mm)
Standard Length
(Meter)
I.D. W.T.
(Nominal Size)
I.D.
(max)
W.T.
(Nominal Size)
Thick Type
FEP0047 4.7±1 0.20 3.8 0.25 1
FEP0055 5.5±1 0.20 4.5 0.25 1
FEP0070 7±1.5 0.20 5.6 0.25 1
FEP0090 9±1.5 0.20 7.5 0.26 1
FEP0115 11.5±1.5 0.25 9.3 0.30 1
FEP0145 14.5±1.5 0.3 11.7 0.37 1
FEP0190 19±2 0.3 15.3 0.37 1
FEP0240 24±2 0.4 19.3 0.5 1
FEP0280 28±2 0.4 22.5 0.5 1
FEP0350 35±2 0.4 28.1 0.5 1
FEP0440 44±2.5 0.4 36.1 0.5 1
FEP0540 54±2.5 0.4 43.3 0.5 1
FEP0660 66±3 0.4 52.9 0.5 1
FEP0780 78±3 0.4 62.5 0.5 1
FEP0900 90±4 0.4 72.1 0.5 1
FEP1030 103±4 0.4 82.5 0.5 1
Thin Type
FEPTW0070 7±1.5 0.15 5.6 0.20 1
FEPTW0090 9±1.5 0.15 7.5 0.20 1
FEPTW0115 11.5±1.5 0.2 9.3 0.26 1
FEPTW0145 14.5±1.5 0.2 11.7 0.26 1
FEPTW0165 16.5±1.5 0.2 13.2 0.26 1
FEPTW0190 19±2 0.2 15.3 0.26 1
FEPTW0240 24±2 0.2 19.3 0.26 1
FEPTW0280 28±2 0.2 22.5 0.26 1
FEPTW0350 35±2 0.2 28.1 0.26 1
FEPTW0440 44±2.5 0.2 36.1 0.3 1
FEPTW0540 54±2.5 0.2 43.3 0.3 1
FEPTW0660 66±3 0.3 52.9 0.4 1
FEPTW0780 78±3 0.3 62.5 0.4 1

FEP fluorescent lamp shatterproof sleeves

Part Number Lamp Size As supplied
(mm)
After recovered
(mm)
I.D.
(min)
W.T. I.D.
(max)
LFEP0165 T5 (15.5) 16.5 0.2±0.05 13.8
LFEP0295 T8 (25.5) 29.5 0.2±0.05 24.0
LFEP0340 T10 (32.5) 34.0 0.2±0.05 30.5
LFEP0400 T12 (38.0) 40.0 0.2±0.05 36.5

Standard Length: As standard.

Related Products