MENU

G5-135 - 135˚C Flame Retardant Heat Shrink Tubing

-55~+135 MinShrink70 Shrink2:1 Fireproof CRUS RoHS

Applications

G5-135 is an environmental friendly polyolefin material tubing and used in military, industrial and commercial applications. The higher temperature rating provides more reliable protection for the product covered. It can be applied to outer insulation protection of wire splices and electronic components.

Approvals / Specifications

UL224 File no. E255532, 125℃ VW-1 600V

Operating Temperature Range

  • Continuous operating temperature: -55℃ ~ 135℃
  • Minimum shrink temperature: 70℃
  • Full recovery temperature: Above 110˚C

Color

G5-135 Standard color: black

G5-3X Standard color: black, white, red, blue, yellow, clear, and yellow-green

(Other colors, special sizes, and cut pieces are available on request.)

Characteristics

  • Shrink ratio: 2:1 / 3:1
  • High temperature resistant polyolefin
  • Very flexible, high flame retardant (colors only)
  • Resistant to common solvent liquid
  • Excellent physical, chemical and electrical performance
  • Compliance with RoHS

Technical Data

Property Specification Requirement Test Method Typical Value
Longitudinal change -10%~10% ASTM D2671 Pass
Tensile strength ≥10.3MPa ASTM D2671 ≥11.3MPa
Elongation at break ≥200% ASTM D2671 ≥400%
Tensile strength after aging 70% of initial value ASTM D2671
(158˚C/168 hrs)
≥80%
Elongation at break after aging ≥100% ASTM D2671
(158˚C/168 hrs)
≥200%
Heat shock No cracking ASTM D 2671
(200˚C/4 hrs)
No cracking
Low temperature flexibility No cracking ASTM D 2671
(-55˚C/4 hrs)
No cracking
Dielectric voltage withstand AC2500V/60S
No breakdown
ASTM D2671 No breakdown
Volume resistivity ≥1014Ω‧cm ASTM D2671 ≥1014Ω•cm
Dielectric strength ≥19.7kV/mm ASTM D2671 22 kV/mm
Flammability VW-1 UL224 Pass

Specification

Part Number Nominal Size As supplied
(mm)
After recovered
(mm)
Standard Length
(Meter)
(mm) (Inch) I.D.
(min)
I.D.
(max)
W.T. 
G5-135 Shrink ratio 2:1
G5135-0012 1.2 3/64 1.2 0.6 0.40±0.08 200
G5135-0016 1.6 1/16 1.6 0.8 0.43±0.08 200
G5135-0024 2.4 3/32 2.4 1.2 0.51±0.08 200
G5135-0032 3.2 1/8 3.2 1.6 0.51±0.08 200
G5135-0048 4.8 3/16 4.8 2.4 0.51±0.08 100
G5135-0064 6.4 1/4 6.4 3.2 0.64±0.08 100
G5135-0095 9.5 3/8 9.5 4.8 0.64±0.08 100
G5135-0127 12.7 1/2 12.7 6.4 0.64±0.08 100
G5135-0150 15 5/8 15.2 7.5 0.77±0.08 100
G5135-0191 19.1 3/4 19.1 9.5 0.77±0.08 100
G5135-0254 25.4 1 25.4 12.7 0.89±0.12 50
G5135-0318 31.8 1 1/4 31.8 15.9 1.02±0.15 50
G5135-0381 38.1 1 1/2 38.1 19.1 1.02±0.15 50
G5135-0508 50.8 2 50.8 25.4 1.14±0.16 25
G5135-0800 80 3 76.2 38.1 1.27±0.20 25
G5135-1000 100 4 101.6 50.8 1.40±0.23 25
G5135-1200 120 5 127 63.5 1.52±0.23 15
G5135-1500 150 6 147 75 1.50 15

Part Number Nominal Size As supplied
(mm)
After recovered
(mm)
Standard Length
(Meter)
(mm) (Inch) I.D.
(min)
I.D. W.T.
(min)
G5-3X Shrink ratio 3:1
G5-3X0030 3 1/8 3.0 1.0±0.2 0.50 200
G5-3X0060 6 1/4 6.2 2.0±0.2 0.60 100
G5-3X0090 9 3/8 9.1 3.0±0.2 0.65 100
G5-3X0120 12 1/2 12.1 4.0±0.2 0.70 100
G5-3X0180 18 3/4 18.0 6.0±0.3 0.75 100
G5-3X0250 25 1 25.0 8.0±0.3 1.00 50

Related Products